Steam locomotive Ye
Issued in 1912-1925 years. Built 1528 locomotive.
2TE121 – 2-x sectional Teplovoz s Yeelectric transmission, type - 121. Issued in 1978-1992 years on Lugansk Diesel Locomotive Plant. Built 76 diesel locomotives.
Design of powerful freight diesel locomotives with a capacity of 4000 hp. the section began in the mid-1960s. Initially, the project was carried out at the Kharkov Transport Engineering Plant (TE15 with D70 diesel), however, due to a reduction in production at the enterprise, the development was transferred to the Voroshilovgrad Diesel Locomotive Plant. In accordance with the technical requirements of the Ministry of Railways (Motor vehicle) in 1970 parameters were approved: driving wheel diameter 1250 mm and load on rails up to 23 ts, later increased to 25 ts. To ensure these parameters, the designers decided to use a support-frame suspension of traction electric motors with a two-stage spring suspension - solutions, significantly complicating the development of transmissions compared to series for Western railways due to high requirements for torque and adhesion coefficient.
The first experimental two-section diesel locomotive 2TE121-001 was built at the end 1977 year. During the tests, design features were identified, requiring adjustments: to reduce weight and enable operation on P50 rails, the length of the body was reduced to 21 m, and the wheelbase is up to 15,6 m. During the life cycle of the model, various modifications of the 5D49 and 3D70 power plants were also tested.
The diesel locomotive consists of two identical sections with a supporting body made of low-alloy steel and removable roofs for easy equipment maintenance. Each section rests on two three-axle bogies. The chassis design includes a complex spring suspension system of leaf springs and coil springs with hydraulic shock absorbers, ensuring stability under high loads. The traction drive is implemented through the support-frame suspension of ED-126U1 electric motors with torque transmitted to the wheels through rubber-cord couplings and gears with a high reduction ratio (4,318).
The power plant includes a 2V-9DG diesel generator set (diesel 2V-5D49 and synchronous generator A-714U2). The control system includes a UVKT-9U2 rectifier unit, converting current to power traction motors. A design feature is a centralized air supply system, providing cooling of the traction unit, electric motors and automation units. The locomotive is equipped with a rheostatic brake with a power 3200 kW and fire extinguishing system (foam and gas). The driver's cabin is separated into a separate space on shock absorbers, which significantly reduces noise and vibration levels.
Diesel locomotive 2TE121 is designed to operate with heavy freight trains on highways with medium and complex terrain. During operation, the machine demonstrated high traction force (to 295 kN in continuous mode) when fuel consumption decreases by 8-10% compared to diesel locomotives of the TE10V series. The design provided better resistance to slipping and increased smoothness even on tracks with defects.
Despite the high performance, mass use of the series was complicated by production problems in the mid-1980s (insufficient quality control of components) and the complexity of servicing unique nodes in the context of shortening supply chains. After 1992 production stopped. To date, most of the park has been decommissioned., however technical solutions, implemented on 2TE121 (in particular, traction drive system and cabin parameters), formed the basis for the design of subsequent models of freight locomotives TE136 and 2TE137.