Electric locomotive ChS5
Issued in 1966 year. Built 2 electric locomotive.
ChS200 – ChechoSlovak electric locomotive, at design speed 200 km/h. Issued in 1974-1980 years on Skoda. Built 12 electric locomotives.
The development of the ChS200 electric locomotive began in 1969 year at the Škoda enterprise (Czechoslovakia, G. Pilsen). The order was due to the need to provide high-speed passenger trains on the Leningrad-Moscow line with powerful DC machines. The project received the index 66E0 and was based on the design of an electric locomotive ChS2, however, it required significant modernization in terms of traction characteristics and aerodynamics. During the design process, the body shape changed several times; the final version was adopted after testing prototypes in the wind tunnel and successful testing of prototypes at the Velim test site (G. Cerchenice).
In 1974 two experimental electric locomotives were built (ЧС200-001 and ЧС200-002), passed speed tests up to 210 km/h. Based on the experience gained in 1979-1980 years, the main batch of type 66E1 machines was produced (003-012). The design speed is 220 km/h, and operational 200 km/h.
ChS200 is a two-section eight-axle DC electric locomotive. The use of an eight-axis scheme made it possible to provide high traction while maintaining permissible loads on the rails 19,5 T. The sections are connected by a rigid articulated hitch-beam with an impact-jaw mechanism, which eliminates self-disengagement during high-frequency vibrations. To dampen lateral vibrations and stabilize the body in curves, dampers from the West German company Boge and the Dutch Koni are provided.
The electric locomotive is fully equipped 8 traction electric motors with power 1050 kW (hourly mode) and 1000 kW (long mode). To reduce the load on the contact wire at high acceleration currents, two current collectors are installed on each section. The electrical circuit provides independent power circuits for each section, which is not typical for rheostatic DC systems, but simplifies power management.
The control system includes rheostatic control of traction and braking, as well as automated complexes: ALS-200, ARR-200 and microcomputer-based auto guidance system "Electronics" C5-12. These systems provide speed control, compliance with the traffic schedule and saving energy by optimizing engine operating modes.
Locomotives of the ChS200 series were intended to serve high-speed passenger trains on highways with high traffic volumes, including directions St. Petersburg - Moscow, St. Petersburg – Murmansk and others. The design made it possible to efficiently transport trains from 12-14 cars at speeds up to 200 km/h.
An electric locomotive was created based on the ChS200 design ChS6: by changing the gear ratio of the gearboxes (with 1,786 to 2,079) power is reoriented to increase traction force for heavy trains while reducing the maximum speed to 160 km/h. Currently, a number of series machines (For example, ChS200-003 and more 7 electric locomotives) are undergoing a restoration program under the PKTB project. Modernization includes replacement of wheel sets, installation of LED lighting, updating of air conditioning systems and integration of modern control and safety monitoring modules. Electric locomotives were taken out of service in 2024 year and return back to the main course of the Oktyabrskaya railway.