Arrow_up

Electrothermal locomotive ED-18

ED-18 – experienced Yeelectric train with Disel engine, type - 18. Issued in 1959-1961 years on VNIITP and Demikhovsky Machine-Building Plant. Built 3 electric locomotive.

Experimental narrow-gauge vehicle of the Demikhovsky Machine-Building Plant, created as a development of the concept of a combined electric diesel locomotive with a main asynchronous traction motor and an auxiliary diesel engine. The work proceeded after tests by an experienced ED-16 (1958), where the advantages of the combined scheme for peat transport were confirmed, but structural and electrical shortcomings also emerged, taken into account when designing ED-18.

The electric diesel locomotive was developed by VNIITP and built by the Demikhovsky plant. ED-18 was distinguished by reduced structural weight; traction motors received independent ventilation; carriage-type body with two driver's cabins; improved electrical circuit (including the ability to work on a multi-unit system); a ventilation system was installed and a number of defects were eliminated.

The ED-18 uses direct current electric transmission with a main traction asynchronous electric motor and an auxiliary diesel engine (combined electromechanical drive, inherited from predecessor). Main asynchronous motor in single-phase mode from 6 000 B drives the rotor of a DC traction generator; the generator can operate from the mains (in electric locomotive mode), and from diesel (in diesel mode). Combined wheel drive: traction generators powered collector electric motors DK-104G, connected through chain couplings and two-stage transfer gearboxes with telescopic cardan shafts and axial gearboxes of the trolleys.

In terms of traction characteristics, the ED-18 mainly met the requirements of narrow-gauge peat transport. However, the electric diesel locomotive had a significant drawback - the current weight limitation of the traction motors, and direct current electrical transmission required a significant amount of scarce equipment and high copper consumption.

The machine underwent trial operation at the Shatura Transport Directorate and demonstrated the applicability of a combined circuit with a main asynchronous motor. However, the practical limitations of direct current electrical transmission have stimulated parallel work on turbo-mechanical machines (TEU-1) to select the most economical and technological direction of serial production.

Peculiarities:

Specifications:

Operation:

Predecessors:

Followers:

You can add to the article:

Telegram logo Open our Telegram chat

Or find a group @railtrain_chat

Similar series: