Arrow_up

Self-propelled power plant ESU3

ESU3 – experienced Yepower station Sself-propelled Ulow gauge, type - 3. Issued in 1975 and 1981-1982 years on Guba Machine-Building Plant. Built 3 car.

The first power plant ESU3 was designed by VNIITP and built by the Guba plant in 1975 year. In 1981-1982 two more prototypes were produced over the years. In 1987 year, a modification of ESU3a with an improved traction motor control system was developed, serial production of which continued from 1989 by 1992 year in quantity 36 units. On the basis of ESU3a, a project for the TEU16 diesel locomotive was also created for children's railways.

The main difference between ESU3 and ESU3a from their predecessors (ESU1 and ESU2) began the use of a more powerful diesel generator set, the energy of which provided power to the equipment and movement of the machine. Structurally, ESU3 is a diesel locomotive with alternating-direct current electrical transmission.

Early models used an AD100-T/400 diesel generator and a semi-controlled rectifier unit with phase control. However, such a scheme reduced the power factor and efficiency, increasing fuel consumption. In the ESU3a modification, a power transmission with a diode rectifier and a two-motor thyristor electric drive was introduced. This made it possible to ensure a symmetrical generator load, increase efficiency and stabilize bus voltage.

The ESU3a power plant was based on the 1D6BA engine and the GSF-100 synchronous generator. The movement was provided by two traction tram electric motors DK309A, mounted on the transfer case shaft; transmission of rotation to the axles was carried out through cardan shafts and axial gearboxes. In terms of traction characteristics, the car was superior to locomotives with mechanical transmission (For example, TU6A), developing traction force up to 3600 kGS.

During operation, a number of design flaws were revealed. Application of trolleys from ESU2A with the increased weight of the car it led to frequent breakage of springs and springs. The low reliability of the 1D6 engine and remote control system was also noted. Due to the difficulty of maintaining power transmission, many machines had a short service life.

Nevertheless, with proper maintenance, the machines demonstrated high efficiency. So, power plant ESU3 No. 2 worked at the Kupansky peat enterprise until 2006 thanks to modernization: replacing the engine on YaMZ-236 and modifying the bogies. In 2011 year, this car was transferred to the Pereslavl Railway Museum in the village of Talitsy, and later to the club collection "North-West Railway", where the major renovation took place.

Peculiarities:

Modifications:

Specifications:

Operation:

Predecessors:

Followers:

You can add to the article:

Telegram logo Open our Telegram chat

Or find a group @railtrain_chat

Similar series: