English engineer Robert Furley 12 May 1864 received a patent for a steam locomotive of his design. This locomotive design was not new., but it was Robert Ferley who was able to interest many countries in it, making a successful marketing company. There are two types of locomotive designs: single and double.
The essence of the design of single locomotives: a locomotive boiler was attached to the frame. The frame itself was supported by pins on 2 carts, which gave locomotives the ability to turn the locomotive in small radius curves. In one bogie of the locomotive there was a steam engine with 2-3 moving axes, second trolley with 2-3 non-moving wheels of small diameter was supporting. An additional tender was usually located above the second cart.
The essence of the design of twin locomotives: fixed on an extended frame 2 locomotive boiler with two fireboxes located between them in the center. The frame itself is supported by pins (cylindrical mount) on 2 carts, which gave the locomotives of Ferlie's design the ability to turn the locomotive in small radius curves. Each locomotive bogie contained a steam engine with 2-3 moving axes in each, without supporting axles. Most twin models of the Ferlie system did not have sliding axles, but on some models it was 1 sliding axis. Twin locomotives of the Ferlie system had a joint steam distribution system, which made it possible to partially synchronize the operation of steam engines.
The Weiser Railroad’s № 3 Torch Lake
By design, the twin locomotives of the Ferlie system were tank locomotives, i.e. steam locomotives, in which the tender with water and fuel was located directly on the locomotive along the boiler, single locomotives of the Ferli system had an additional tender opposite the firebox.
11 February 1870 year, the official demonstration of the Ferlie Little Wonder twin locomotive took place for invited guests from senior officials of British railways and countries around the world: Mexico, Kingdom of Prussia, Russian Empire, USA, France and Sweden.
Fn 130 pre-revolutionary
In the Russian Empire, twin locomotives of the Ferlie system appeared in 1872 year. In 1871 year board of the Poti-Tiflis railway (with 1883 Transcaucasian railway) scheduled 13 twin locomotives of the Ferli system for work on the most difficult section of the road - the Suram Pass. The slope of the railway track in this section reaches 45,7 ‰ and until the opening of the tunnel under the Suram Pass in 1890 year, only a combination of two twin locomotives of the Ferlie system could travel along such a difficult section of the route.
In 1883 Transcaucasian railway ordered the Kolomna plant 17 steam locomotives, which were originally built for liquid heating (oil and fuel oil).
During 1885-1890 years in the Russian Empire on the Transcaucasian railway, Ferley steam locomotives built abroad were converted for liquid heating based on the model of the steam locomotives of the Kolomna plant. On the Transcaucasian Railway, Ferli steam locomotives worked on mainline work until the electrification of the Suram Pass section in 1934 year. After that until 1945 Ferlie locomotives were used for shunting work, and then were written off.
One of the main advantages of the twin locomotives of Ferlie's design was that, that no turntables were required in operation. The locomotive moved in both directions and there were no restrictions on visual observation for the locomotive crew of the track condition. This same advantage was offset by a small supply of fuel and water, and as a consequence short travel distance.
On 2022 remain in working order for a year:
1 original double furley 1879 year
1 original single Ferlie 1873 year
Twin locomotives of the Ferlie system predetermined the layout of modern locomotives, where the engine is located on the frame or supporting body, and the wheel axles are in the trolleys, untied in a rigid frame.
Peculiarities:
Steam locomotives of this system worked on the railways of the Russian Empire / USSR more 60 years and were replaced by electric locomotives
Allan and Walshater steam distribution systems were installed on Russian locomotives
The twin locomotives of the Transcaucasian railway were the largest in size, and the smallest in size were the steam locomotives for the Ffestiniog Railway (Great Britain, Wales, Gwinnett County)
Ferlie's steam locomotives were introduced to the public for the first time on the narrow gauge Ffestiniog Railway.. This same narrow gauge railway is the last, on which steam locomotives of the Ferlie system of both types are operated
The series was used in 21 camp of the world and has modifications for the gauge: 597 mm, 610 mm, 750 mm, 914 mm, 1000 mm, 1067 mm, 1435 mm i 1524 mm
Twin locomotives of the Ferlie system (two steam engines in two bogies) had the following axial formulas: 0-2-0--0-2-0, 1-2-0--0-2-1, 0-3-0--0-3-0, 1-3-0--0-3-1
Single steam locomotives of the Ferlie system (one steam engine and one support trolley) had the following axial formulas: 0-2-0--2-0-0, 0-3-0--2-0-0, 0-3-0--3-0-0 .
In twin locomotives of the Ferli system for the German Empire (II Reich) under the rut 1000 mm, unlike other twin locomotives, Ferlie steam engines were directed towards the firebox, in addition, the locomotive was a tram type, that is, the roof of the locomotive had the length of the locomotive frame dimensions
I M
Twin locomotives for the Transcaucasian and Mexican railways had a similar design and were approximately equal in power / traction force
On the railways, Ferlie steam locomotives received the designations:
Russian Empire/USSR 1067 mm i 1524 mm – series F
II Reich/III Reich: 750 mm – series II K, 1000 mm – series I М
Ffestiniog Railway steam locomotives received proper names in honor of famous historical figures of Wales
In New Zealand - series R, S, E
By Boston Lodge for the needs of the Ffestiniog Railway in 1979 and 1992 years. two twin locomotives were built. In 1999 year another single locomotive of the Ferlie system. In 2016 In 2012, construction began on a new twin locomotive of the Ferlie system.. On 2022 year this locomotive is in the process of assembly.
Modifications:
Pecho-Bourdon (Péchot-Bourdon) – for serfs and military field narrow-gauge railways of the French army under gauge 600-610 mm. Structurally, it consisted of twin locomotives of the Ferlie system with an axial formula 0-2-0--0-2-0. Before World War I (1914-1918) was built in France 52 locomotive, During the First World War in the USA, a 280 locomotives and more 15 in the UK.
Pecho-Bourdon – Serbia
Merdin Emrys
NZR E 175 Josephine
Specifications:
Data on steam locomotives of the series are presented F all modifications operated on the Transcaucasian railway
In the UK 2 twin Ferlie steam locomotives - one in operation 1879 G., alone in the museum 1885 G., track 597 mm
In New Zealand there is one double 1872 G. and one single 1872 G., both are museum exhibits, track 1067 mm
In the USA there is one single Ferlie system 1873 G., which is Furley's oldest operating locomotive and the oldest operating US locomotive, track 1435 mm
There is one in Germany I М (DR-99.162) track 1000 mm in the process of restoration and Pecho-Bourdon 1917 set in motion, track 600 mm
There is one in Serbia Pecho-Bourdon 1916 years of museum condition, track 600 mm
Predecessors:
Belgian steam locomotive Seraing
Followers:
Electric locomotives S, SI and SS - replaced steam locomotives of the Ferli system in operation at the Suram Pass of the Transcaucasian Railway