Steam locomotive St.
Issued in 1914-1915 years. Built 15 steam locomotives.
OR22 - electric locomotive Osingle-phase with Rmulberry straightener, 22 tons - axle load. Issued in 1938 year on Dynamo and Kolomna plant. Built 1 electric locomotive.
Late 1920s, when did the electrification of railways across the Suram Pass begin?, experts realized, that the use of direct current with voltage 3 kV will not be able to effectively solve the problems of increasing the weight of trains and their speed. The simplest calculations showed, that when driving a train with a mass 10 000 t on the rise 10 ‰ at speed 50 km/h the traction current of electric locomotives will be more than 6000 A. This would require an increase in the cross-section of contact wires and a more frequent location of traction substations.
As a result, At the first All-Union conference on railway electrification, a decision was made to create a pilot section, electrified with alternating current (50 Hz) with tension 20 kV. For this it was necessary to develop an experimental locomotive, which would allow us to identify the advantages and disadvantages of AC electric locomotives. OR22 became the first AC electric locomotive in the USSR. In 1934 In 2012, the NKPS commissioned the Moscow Dynamo plant to design and build an experimental electric locomotive powered by an alternating current network 20 kV. The work was headed by a young engineer Boris Nikolaevich Tikhmenev. The electric locomotive body is designed without open end platforms, which increased the space in the engine room to accommodate electrical equipment.
In March 1937 year, the drawings of the electric locomotive were transferred to the Kolomna Machine-Building Plant, where it received the designation OR22. In October 1938 year, the electric locomotive was assembled and passed factory tests. The OR22-01 electric locomotive had a mass in working condition 132 t and maximum speed 85 km/h. He equipped himself 6 traction electric motors DPE-340A, which were connected in parallel. A mercury rectifier with grid voltage regulation was designed by the Leningrad Elektrosila plant and was cooled with water. The electrical circuit provided for receiving TEDs at the terminals 2 voltage levels: 750 and 1500 In, with a smooth voltage change within each stage.
In December 1939 year OR22-01 passed the first tests on the experimental ring of TsNIIZHT. The electric locomotive had higher traction properties compared to DC electric locomotives. However, the presence of water cooling of the rectifier created additional difficulties during operation.. With the outbreak of the Great Patriotic War, work on the electric locomotive was suspended, and at the end 1941 years ago it was dismantled. Mercury rectifier used for mobile traction substation, and other components - as spare parts for DC electric locomotives. The OR22 electric locomotive became the basis for the creation of a more advanced series of electric locomotives VL61.