TOOTH – WITHspellingUBoring machine designed by Viktor Kharitonovich BAlashenko. Issued in 1959-1963 years on Red Hammer. Built 104 car.
The machine is designed to remove contaminated ballast from the railway track, slag and snow, ice chips, deepening between tracks and loading floats from slopes of excavations and slopes. Using the machine made it possible to release, depending on the duration and operating conditions, 350 to 500 railway workers.
The working parts are mounted on the TOOTH frame:
- 2 disc ripper – for loosening soil on interpaths or on the side of the road;
- Collecting device – consisting of two wings and two fender liners, for supplying harvested material from between tracks to the middle of the track;
- Chain Bucket Elevator – removing material from ruts;
- 2 side elevator - taking material from between tracks or roadsides and deepening the between tracks to 0,5 m;
- Longitudinal and rotary belt conveyors – moving material loaded by elevators into rolling stock;
- Cleaving device – in the form of shields with teeth for loosening ice.
Special gondola cars are attached to the car, the floor of which serves as plate conveyors for moving material along the train. When installing a rotary conveyor across the track, loading is also carried out into ordinary gondola cars or platforms, standing on adjacent tracks.
This car is moved by a locomotive. The drive of the working parts is electric and is powered by a power plant installed on the machine. Pneumatic control of working bodies, compressed air is supplied from the locomotive.
Peculiarities:
- Machine performance – 500 m3/h for contaminated ballast and 1500 m3/h - on snow and ice
- The machine numbering has a 2- and 3-digit designation
Modifications:
- ZUBM (minimum built 3 cars in 1959 year) – Mmodernized, additionally installed brush rotor-feeder, taking material from the path to the surface of the sleepers; side brushes for cleaning between tracks and an inclined conveyor for loading material collected by the rotor onto a longitudinal conveyor
Specifications:
- Crew – 3 people.
- Height – 5100 mm
- Length – 25 000 mm
- Width – 3100 mm
- Track – 1524 mm
- Design speed – 80 km/h
- Working speed – 3-5 km/h
- Minimum curve radius – 80 m
- Performance – 500-1500 m3/time
- Axial formula – 2-2
- Axial load – 20,5 T
- Service mass – 82 T
Operation:
Predecessors:
Followers:
- Puterihtovshchik PRB created by the same designer