ChME3 – ChCzechoslovakian Maneural diesel locomotive with Yeelectric transmission, type - 3. Issued in 1963-1994 years on Czech-Moravian Kolben-Daněk and CZ Interior. Built 7454 diesel locomotives.
The creation of the ChME3 diesel locomotive was caused by the insufficient power and adhesion weight of the previous model ChME2. Originally intended, that an intermediate version of such locomotives could be diesel locomotives like 2G-2G with two diesel engines with total power 1300 hp. and hydraulic transmission. As a result, ČKD-Prague factories began designing more powerful single-diesel six-axle diesel locomotives with electric transmission.
At the end 1963 The first three experimental diesel locomotives were manufactured at the ChKD-Sokolovo plant. These locomotives had a diesel engine with a power of 1350 hp., which significantly exceeded the power of its predecessor. Tests in the Soviet Union, carried out at the Lyublino station of the Moscow railway, confirmed the success of the new design. S 1965 mass production began.
The ChME3 diesel locomotive has a hood-type body and six-axle bogies, which provides high grip weight and maneuverability. Engine K6S310DR, locomotive-mounted, is a six-cylinder four-stroke engine with a vertical cylinder arrangement. Diesel power regulator – centrifugal with hydraulic booster, which allows you to effectively control the power of the locomotive.
The driver's cabin is located between the engine room and the battery room, which provides easy access and good visibility. During operation, the design of the diesel locomotive underwent minor changes, aimed at improving operational characteristics and operator comfort.
S 1965 by 1987 year it was built 7454 diesel locomotive ChME3, including modifications ChME3M, ChME3T and ChME3E. These locomotives were actively used on the railways of the USSR and other countries, including Czechoslovakia, Poland and Iraq. In 1991 last diesel locomotive ChME3T crossed the border, ending the era of mass production.
Diesel locomotives of the series continue to be used in Russia and other countries of the former USSR. Despite changes in railway technology, ChME3 remains a symbol of the reliability and efficiency of shunting locomotives of its time.
Peculiarities:
Can be used as a backup for cargo and passenger diesel locomotives at dead-end stations and train stations
The last foreign locomotive, supplied to the railway during the USSR
Modifications:
770 and 771 – version for the Czech Republic and Slovakia
ChME3T (release from 1984 by 1994 year, built 1167 diesel locomotives) – with rheostatic Tormosis, which is placed in the form of a raised platform on the roof of the small hood
ChME3E (release 1987-1989 years, built 220 car) – electronic equipment has been installed to increase engine power at low shaft speeds
ChME3ECO – installed 3 the engine: two each 600-700 hp. and start depending on the load + another one to power your own power needs 60 hp.