Arrow_up

Electric locomotive ЧС3

CS3 – ChechoSlovak electric locomotive, type - 3. Issued in 1961 year on Skoda. Built 87 electric locomotives.

In 1960 year, the USSR Ministry of Railways identified the need for more powerful passenger electric locomotives due to the increase in the weight and length of trains. Based on an electric locomotive ChS1 a new locomotive with AL4846eT traction motors was developed (by 700 kW), previously installed on ChS2 "Cheburashka". In 1961 year, the Škoda plant produced 87 electric locomotives series ChS3, became an enhanced version ChS1.

Electric locomotive ChS3 is a single-section four-axle DC locomotive with axial formula 2o−2o, designed for contact line voltage 3 kV. Its design includes a modernized Škoda traction drive system with cardan couplings instead of the Sécheron system, applied on ChS1. The equipment remained similar to the base model, excluding changes to the powertrain.

From March to June 1961 all year 87 locomotives were transferred to the depot of Kharkov Southern Railway and Moscow-Kurskaya Moscow Railway, where the route Moscow – Kursk – Kharkov – Ilovaisk was served. Later, some of the cars arrived at the Barabinsk depot of the West Siberian Railway. Due to insufficient traction characteristics for heavy trains in 1963 year, all emergency situations 3 of the Moscow and Southern roads were transferred to Barabinsk, where electric locomotives were replaced VL22M and VL23 on the section Petropavlovsk - Omsk - Barabinsk - Novosibirsk - Taiga - Mariinsk.

In the 1970s, during major repairs at the Novosibirsk Electric Locomotive Repair Plant, part of ChS3 was equipped with a telemechanical system for many units, combining them into rafts of two coupled locomotives under the control of one crew. This made it possible to drive long trains on difficult sections of the West Siberian Railway, such as Novosibirsk – Taiga – Mariinsk and others.

Since the 1980s, ChS3 were operated mainly in flat areas west of Barabinsk, including the routes Omsk - Nazyvaevskaya and Barabinsk - Omsk - Kurgan - Petropavlovsk. As they arrive at the Barabinsk depot, more "heavy" ChS2 "Cheburashka", ChS3 locomotives were gradually withdrawn from service, and by January 1991 years they were all laid off from work.

In the 1990s, part of ChS3 was converted into service electric locomotives for transporting the management of the West Siberian Railway. During the alteration, the fan motors were dismantled, replaced the group controller with equipment from an electric train ER2, changed the driver's cabin and interior, and also moved some of the equipment to the roof and under the body. Some locomotives received new designations, such as EM-02 or PEM-4. Most of these machines were taken out of service by the end of the 2000s., and the last one is at the beginning 2012 year.

Preserved for history 3 locomotive:

Factory designation:

Peculiarities:

Modifications:

Specifications:

Operation:

Predecessors:

Followers:

Telegram logo Open our Telegram chat

Or find a group @railtrain_chat

Similar series: