Arrow_up

Electric locomotive DKm

DKm – Dwaxy Kapot electric locomotive, Mmodernized. Issued in 1935-1937 years on Dynamo and Podolsk Steam Locomotive Repair Plant. Built 12 electric locomotives.

In the early 1930s in the Urals, the task arose of replacing imported locomotives for magnesite and asbestos mines with domestic equipment. On the initiative of the People's Commissar of Heavy Industry in 1933 year began its own development based on a wide-gauge electric locomotive EP. In 1935 year "Dynamo" together with the Podolsk plant presented a new project - a narrow-gauge electric locomotive for 1000 mm gauge, designated DKm.

The main engineering task is to fit powerful traction equipment into a compact narrow-gauge body and at the same time provide automatic coupling, which required a major redesign of the design of the undercarriage of the EP electric locomotive. Instead of the originally proposed DB-2 engines, special DPE-100 engines were used (version DPE-100A), and the control system was developed anew. Electric locomotives were designed for contact network 550/750 In.

Cowl-type locomotive body. Removable hoods are welded from angles and steel sheets 1,5 mm, bolted to the trolley frame and the ends of the cabin. Hoods are angled for better visibility, service hatches on top and doors on the sides. Ballast plates are located under each hood, motor-compressor and starting resistance; There is a line contactor under one of the hoods.

Central cockpit with two control stations (one in each right front corner) equipped with diagonally positioned doors and sliding windows. At the posts there are two controllers with direct control, of the crane, appliances and heating (3 electric furnaces). On the roof there is a central current collector DG‑8 (one ski), main fuse and horn arrester; side current collectors - on brackets at the ends of the cabin.

The first DKM arrived at the Karagai magnesite mines in 1936 year, where that year the track was switched from 750 on 1000 mm. This is a farm with an annual cargo turnover 2,25 million tons and a network of tracks of about 5 km became a natural testing ground. K 1937 were in operation for a year 10 units DKm-12, and all built 12. The DKM electric locomotive became a successful example of adapting mainline ideas to a narrow gauge and solved the pressing problem of transporting large volumes of minerals in the pre-war years.

Factory designation:

Peculiarities:

Specifications:

Operation:

Predecessors:

You can add to the article:

Telegram logo Open our Telegram chat

Or find a group @railtrain_chat

Similar series: