DP-M – experienced Disel-Pdetour, Mmodular. Issued in 2013 year on Stadler and Metrowagonmash. Built 1 composition.
The train was being developed, like the older series for rail buses RA1 and RA2, in which the power plant is located under the floor. In this series, the diesel engine with generator is located in a separate power module - a short car.
Diesel train built by two factories: Stadler Bussnang – diesel engines, and Metrovagonmash - everything else and final assembly.
Promising advantages include the possibility of placing more powerful engines with higher power 400 kW, security of the power module during accidents, replacement with another module during repairs, increase in adhesion weight due to the load from attached cars (they don't have their own carts).
Other designations:
DPM – without a dash, to 2016 year
770 and 770.10 – factory designation
Train layout:
Head module – with cabin and passenger compartment, convenient for people with limited mobility
Power module - with a diesel unit and a through passage through it
Several trailer cars
Tail module - on the back side of the train, without traction and only with passenger compartment
Peculiarities:
The diesel engine is located in a dedicated module, which increases fire safety and maintainability (It is enough to replace the power plant module and the train is ready to go on line)
In the head sections it is installed according to 1 doors in the center of the salon, forming a vestibule in the center, and intermediate cars with standard, double-tambour layout
Energy-absorbing elements are installed in the design, softening the blow to 3 MJ (calmly endures 10 t at speed 70 km/h)
It is possible to control up to two trains using CME 6 carriages
DP-M-1
DP-M-1
DP-M-1
DP-M-1 salon
DP-M-1 cabin
Specifications:
G – head, P – intermediate, 2 Class / 3 Class
Capacity – 2 × 190 / 226 people. (G) and N × 143 / 184 people. (P)
sedentary – 2 × 96 / 132 places (G) and N × 79 / 128 places (P)
Length – 2 × (18 180 + 7000 + 17 400) mm (head + power block + tail modules) and N × 24 700 mm (P)
Width – 3480 mm
Track – 1520 mm
Design speed – 160 km/h
Minimum curve radius – 80 m
Engine power (Cummins QSK38) – 2×1520 hp. (3040 hp.)
TEM power (long-term) – 2 × 4×250 kW (2000 kW)
Type TED – asynchronous, TSA
Axial formula – (2-20+20-2) (G) and 2-2 (P)
Axial load – 14,2 T
Service mass – 2×113 t (G) and N×40.4 t (P)
Transmission type – electric, AC
Composition – 2-6 carriages (Always 2 head and up 4 intermediate)